| Certification: | CE, ISO, FDA, UR, PCI, PDA |
|---|---|
| Type: | Glass Washing and Drying Machine |
| Structure: | Vertical |
|
Still deciding? Get samples of US$ 18000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Carbon fiber conductive brushes are used for Low-e glass detection.
2.Section 2 cleaning section is made of stainless steel, and all bearing bases are made of stainless steel.
3. 02 end brush bearing is self-aligning bearing with long service lift and high precision.
4.The front 3brushes of section02 are with 0.1mm diameter brush hair, and the back 3brushes are with 0.2mm diameter brush hair, which can easily wash low-e glass.
5.The power of three groups of brushes is driven by three groups of motors. The connection mode is coupling, the brush motor is direcetly connected with the brush to avoid idling of the brush. This is the improvement of brush belt transmission, reducing the probability of problems.
6.The washing zone and water tank are made of stainless steel and corrosion-proof material, water heating function available.
7.The three groups of brushes are controlled by three groups of circuits respectively. The problems of one group of brush circuits will not affect the other two groups of brush circuits.
8.The whole drying cabinet uses a sound insulation cotton with10mm thicknesse, which could reduce noise pollution effectively
9.Air knife with Germany Bystronic technology, the front air knives angle can be adjusted manually. Generally, the angle between air knife and glass surface is 40°.
10. High-speed air blower equipped with air heating device, can quickly dry the glass
11.To ensure the washing quality, the water conductivity should not exceed 40µs/cm.
12.The feet of the air blower are equipped with rubber feet pads to reduce the vibration when the high power motor running and stabilize the air blower position
|
Input power
|
31KW
|
|
Max. glass size
|
2000*3000mm
|
|
Min. glass size
|
200*400mm
|
|
Glass thickness
|
3-16mm
|
|
Washing speed
|
2-12m/min
|
|
Transmission speed
|
2-50m/min
|
|
Air pressure
|
0.6-0.8 Mpa
|
|
Overall dimension
|
8000*1900*2000mm
|
Pre-sales:
-Layout: Sent us your building floor plan, or the sketch, or tell us the size (length, width, height), we will offer you an
equipment footprint according to your requirement.
-Technical Drawings : We will offer Technical Drawings based on the equipment layout .
After-sales:
-We can provide weekly production report to let you clear of production progrss and production details;
-Providing equipment installation, debugging, and personnel training service;
-Providing English operation manuals;
-We can help you to arrange transportation till to your location;
-One year after installation, exclude wearing parts, supply lifetime maintenance and technical service.
1. Which countries does your products exported to?
A: Our equipments have been exported to 50 Countries and regions, such as South Amercia, South Africa,India,Turkey,Canada,Russia,European Countries and so on.
2. How to use your glass processing machiney?
A: We have paper instructions in English, and we will teach till you do it well.
3. What about quality control?
A: The whole production procedure will be under regular inspection and strict quality control. We'll inspect every component before using. The complete machine will be tested to make sure it can work very well before being out of the factory.The testing video and pictures will be available before delivery.
4. Are you a factory or trading company?
A: We are the professional manufacturer with over 10 years experience in this area.
We not only sell machine for you, but also offer the best solutions.
5. If the glass deep-processing machine have any problem after I ordered it, what could I do?
A: Free parts will be sent to you in the warranty period if the machine has any problem.Free after-sales service life for the
machine, please feel free to contact us if you have any problems.We will offer 7/24 free service and support by phone, WhatsApp, and mail.
6. What about the documents after shipment?
A: After shipment, we will send original documents to you by DHL which include the packing list, commercial invoice, bill of
landing, and other certificates as required by clients.
7. Is it possible to supply installation in my country?
A: Yes, we'll arrange the engineers to install the machine after it arrives in your factory and teach your person .
){kind=link}